Creepy Scarecrow

Cartridges: Oct.31 seasonal cartridge, Lacy Lables Lite Cartridge, Happy Hauntings
Card size: 5 1/2 by 4 1/4
Cardstock: Orange, Brown, Red, Black and Silver
Pattern Paper: SEI and My Minds Eye
Charcoal Chalk Ink, Chestnut Roan Chalk Ink, Glossy Accents, and black marker
Gypsy for Welding
The silver chain on the background was made using my gypsy,  I used the chain border from Oct. 31 and welded them together to make a frame the size of the card base.
The pattern paper was cut to fill the middle of the frame.
I cut the scallop oval from Lacy Lables using the gypsy to measure the scarecrow to fit in center.
I cut the scarecrow out with brown cardstock and used the black and brown chalk ink on the edges.
I attached all the layers and went around the pattern paper with a black marker to look like stitches.
On the scallops I added black dots to the scallops.
I cut out "Creepy" from Happy Hauntings in black for the shadow and red for the regular cut. Glued them together and went over the whole thing with glossy accents. Attached with pop-dots when dry.
I used a $1.00 stamp for the Happy Halloween, inked the edges and popped it up on the bottom. Enjoy!

Birdhouse Card

Cartridge: Winter Frolic
Cardstock: Green, Brown, Red, Blue, White
Pattern paper: DCWV Christmas Stack, Provo Craft Christmas paper
Ribbon, Flower, Brad, Chestnut Roan Chalk Ink, Brown Marker, Glitter pen, pop-dots
Card base is 5 1/2 by 4 1/4
Cut pattern paper 1/4 inch smaller for each layer.
Ink all the layers of the pattern paper.
Put the ribbon around the top layer.
Put the flower on the ribbon with the brad before you attach the layers.
Cut the bird house at 2.5 inches, cut all pieces at the same size. The eyes were drawn in because they were small.
Glue all the pieces together. I used pop-dots for the outer part of the birdhouse.
Use the glitter pen on the leaves of the branch and the ribbon. Enjoy!

Christmas Wishes

Cartridge: Winter Frolic
Cardstock: Beige, brown, green, lt.pink, and dk pink
Pattern paper: DCWV Christmas stack
Flower,brad,liquid glaze, Fiskars scallop border punch
Make card base 5 1/2 by 4 1/4.
Cover with pattern paper cut a 1/4 inch smaller. Cut a strip of other pattern paper and use the border punch and attach to edge of card.
Cut the tree with bird at 4.00 inches and all pieces and shadow at the same size.
Put the tree together and attach to card front.
Cut out the saying at 1 inch with shadow cut, glue all layers and attach to top of card.
Using a brad attach the flower to the bottom of the card and Enjoy!

A Break from Halloween, A Christmas Card

Cartridge: Winter Frolic
Pattern paper: DCWV Christmas Stack
Cardstock: Green, Brown, Yellow, Red, White
Stamp: Studio G Dollar stamp
Ink: Chestnut Roan Chalk Ink, Black ink
pop-dots
Card size: 5 1/2 by 4 1/4
Cut pattern paper 1/4 inch smaller for each layer.
Cut tree from Winter Frolic at 4 1/2 inches. All layers cut at the same size.
Cut the shadow of the tree in white cardstock.
Cut the base tree in brown, the tree in green, I used the gypsy to hide parts of the tree decorations to cut out only what I needed. 
Attach the brown base tree to the white shadow, then add the green tree, glue the decorations on to the tree. Ink around the edges to give dimension.
Attach pattern paper to card base and then place pop-dots on your tree, then place on the card front.
Stamp your saying on a seperate piece of white cardstock and cut out, ink the edges with brown ink and glue down to card front. Enjoy your card!

Halloween Card made by Mom

Happy Hauntings cartridge used.  K and Company pattern paper. The tree was cut at 3 inches. The grass and tombstones were cut at fit to length of 4 1/4. The ghost were cut at 3/4 inch and 1 inch. Google eyes were used on the tree. She did a great job. Enjoy!

Scary Witch Card

Cartridge: Happy Hauntings

Witch cut at 3.5 inches

Bats cut at 1.00 inch

Scary cut at 1.5 inches.

I ran the letters through the xyron upside down and covered each with purple glitter.

The moon is a yellow circle and black ink around the edges.

The pattern paper is from an SEI paper pack.

Inside says "Witching you a Happy Halloween" Enjoy!

Haunted Mansion Card

Another card using Happy Hauntings.
The house is on page 36. All the layers are cut at 4.00 inches.  Putting the layers together on this cartridge are very easy.  I used black cardstock , yellow cardstock and orage cardstock. Glued all the layers together and popped it up. The pattern paper is from SEI paper pack. Used a glitter pen just to go around the edge of the house.  A simple halloween card. Enjoy!

Dracula Halloween Card

Cartridge Used: Happy Hauntings

Cardstock: Recollections

Pattern Paper: K & Company Halloween Bats Flocked Paper

Dracula cut from page 28 all cuts at 3.75 inches

Foundation key-Red

Shift/ Foundation key- black

Layer1/no shift- white

Layer1/shift- Dark green

Layer2/no shift- Lt. green

Glue all the layers together. Used a velvet ribbon to tie down the side.

Wrap the ribbon around the pattern paper and glue paper paper to card base, Tie a knot on the ribbon and use pop dots on the back of the Dracula and put on card. I printed the little saying and used pop dots on the saying. I used a glitter pen for some sparkle accents and used a brown marker for stitching around the base of the card. Enjoy!

Birthday Card for a fisherman

I used green cardstock for the base of the card. The background paper is from Provo Craft. All the fish were from Everyday Paper Dolls.  The large fish were cut at 2.50 inches and the small fish were cut at 1 inch. All the cut lines were inked with brown ink. The celebrate is a dollar stamp from Michaels craft store. Cardstock and pattern paper were inked on the edges. Enjoy!