For the Bride

Cricut machine
Create-A-Critter cartridge (umbrella)
Wild Card cartridge (saying)
Pattern Paper: Provo Craft Paper Pack and K and Co.
Cardstock: Recollections
Glossy Accents
White Gel Pen
Black Glaze Pen
I-Roc tool and Gems
Card size is 5 1/2 by 4 1/4 inches. The card base is white cardstock. I covered the front with a piece of pattern paper cut to the same size of the card.
The umbrella is cut at 3.5 inches. I cut the base layer is the silver cardstock and the top of the umbrella with the pattern paper. I did not cut the face layer.  On some of the dots on the umbrella I put a gem to add some sparkle. I went over the other dots with a black glaze pen to darken the dots. I added glossy accents to the handle. I used pop dots to pop up the umbrella. The phrase was cut from wild card cartridge at real dial size at 2 inches.  I added white gel pen dots to the letters.  I went around the edge with the white gel pen.

Easter Banner Card

Sizzix Eclips Machine
Ecal Software
SVG File Banner Day from Lettering Delights
Stickles: Stardust
Font: Boulder
Recollections: Gems
Pattern Paper: K and Co. Brenda Walton
DMC Floss for Banner
Card size is5 1/2 by 4 1/4 inches
Font was cut at W:0.396 inches  H: 0.574 inches
Banner was cut at W: 0.695 inches  H: 2.763 inches
I curled the edges of the banner to give it a worn look.

Easter Chick

Sizzix Eclips Machine

SVG File: Treasure Box Designs

Pattern Paper: SEI Holiday Paper Pack

Cardstock: Recollections

Distress Ink: Walnut Stain

White Gel Pen

Pink Glaze Pen

Ribbon and Flowers From Michaels

Studio G Stamp: Happy

Card size is 5 1/2 by 4 1/4

Cowgirl

Cricut Machine

Paper Doll Dress Up

Cardstock: Recollection

Pattern Paper: Recollection Wild Animal

Peachy Keen Face Stamp

Black Ink

Pink Chalk

Brown Marker

white Gel Pen

I-Roc tool and gems

Pink Ink

Card size is 5 1/2 by 4 1/4. Mats are cut 1/4 inch smaller.  Layer the mats and attach to the front of the card base. The cowgirl is cut at 3.25 inches. All the layers were cut relative size. I used the white gel pen to add accents to the clothing. I used the brown marker to add accent to the rope. Inside the card says "When you reach the end of your rope, tie a knot and hang on".

Hang In There

Cricut Machine
Gypsy
Create-A-Critter Cricut Cartridge
Recollection Cardstock: Yellow, Brown, Lt. brown
Unknown Pattern Paper
Distress Ink: Black Soot
Stickles: Green
Text: Computer Generated
Font: CK Chunky

Card is 5 1/2 by 4 1/4 inches. The pattern paper mat was cut 1/4 inch smaller then the card. I inked all the edges of all the cuts. The box the monkey is on is 2 1/2  by 3 3/4 inches. the text box is 1 3/4 by 2 inches. Print Hang In There and attach to card front. Attach the larger box to side of card.
The monkey was cut at 3.5 inches all layers. The vine was cut at 3 3/4 inches. Cover the vine with the green stickles and let dry. When dry attach to card front starting at the large box. Pop up the monkey and place on the vine to look like he is hanging there. The leaves were cut at 1 inch. The leaves were covered with the green stickles. Let dry and glue to card. 

Easter Card for Sketch Challenge

This is the sketch for the Cardz TV Sketch Challenge # 7

Here is my card

Cricut Machine

Gypsy

Four Legged Friends Cricut Cartridge

Create-A-Critter Cricut Cartridge

Lacy Labels Cricut Cartridge

Recollections Cardstock: Kraft, Pink, White, Orange, Green

Pattern Paper: Recollections Girl Collection

Stickles: Pink, Cotten Candy, Diamond

White Gel Pen

Studio G Stamp and Ink

Ribbon

Flower with brad

Card base is 5.1/2 by 4 1/4 inches. Pattern paper cut to 5 1/4 by 4 inches to cover front. Side panel pattern paper is 2 1/2 by 4 inches. Cardstock layer is 2 3/8 by 3 1/4 inches. I used the Gypsy to design the card. The bunny was from Four Legged Friends (button #22) and cut at W: 3.37 by H: 3.94 and I used all the layers. The carrots were from Create-A-Critter (button #3 shift) I used the base layer and layer #2 (using the shift button for all layers). For the sentiment box I used Lacy Labels (button #13) base key and base plus shift. The sizeis W: 2.34 by H: 1.42.

I wrapped a piece of ribbon around the side panel box and added a small flower to the ribbon. I popped the bunny up and placed it on the side panel and gave the bunny a pink bow and some painted wiggle eyes. I also added pink, diamond and cotton candy stickles to the bunny. I glued the 2 end carrots down to the paper and popped the middle carrot up. On the sentiment box I used a stamp from Michaels and I added 4 I-Roc gems to the corners.

Its All About the Green

Cricut Machine

Celebrate with Flourish Cricut Cartridge

Cardstock for Card Base: Recollection Gem Pack

Cardstock: Recollections Green

Pattern Paper: DCWV

Stamp: Studio G

Ribbon: Offray

MS Border Punch

Metallic Gelly Roll Pen: Sakura

Green Flock: Martha Stewart

Fiskars Decorative edge Scissors: Deckle Edge

Pop-Dots

ATG Gun

Cardstock is cut to make a 5 1/2 by 4 1/4 inch card base. The Clover/Shamrock is cut at 3 inches. I cut the base in yellow/gold and the top layer in 2 shades of green. I added green flocking to one side and went around the edge of the other clover/shamrock with a green matallic pen. I used the Martha Stewart border punch on both pieces of pattern paper and went down both sides of each paper.  I attached the clover/shamrock with pop dots. I stamped the saying with green ink and used decorative edge scissors around the edge and popped it up.



Celebrate Easter

Sizzix Eclips Machine

Ecal Software

SVG file: Designs On Cloud Nine

Cardstock: Recollections

Pattern Paper: DCWV

Stamp: Studio G

Stickles: Cotton Candy

Glitter Glue: Pink/Purple

Distress Ink: Peeled Paint, Walnut Stain

Painted Wiggle Eyes From Michaels

White Gel Pen

Card size: 5 1/2 by 4 1/4

Scalloped Shamrock Card

Sizzix Eclips Machine

Ecal Software

SVG File: Scalloped Shamrock

Cardstock: Recollections

Pattern Paper: K and Co.

Green Mirri Paper

Distress Ink: Peeled Paint

Green Ribbon

Using my Ecal software I welded a shadow of the scalloped shamrock to a square and sized it to 5 1/2 by 4 1/4 inches. I then cut out the 3 layers of the shamrock in the different colors of cardstock and pattern paper. I went around the edges of all the paper and cuts with the peeled paint distress ink. I attached all the layers and then added a green bow to the stem of the shamrock.

Bunny Boxes

Sizzix Eclips Machine

Ecal Software

Bunny Box file from Lettering Delights

Cardstock: Recollections Pink, White

Pattern Paper: Recollections Girl and Animal Prints

Blue, White, Pink Ribbon

We Are Memory Keepers Crop-A-Dile and Eyelets

Glue Dots

Cuttlebug Embossing Folder: Textile

Wiggle Eyes

Dream Big

Sizzix Eclips Machine

Cut it set from Lettering Delights : Good Luck Gnomes

White Gel Pen

Brown Marker

Pattern Paper: Recollections Girl Paper Pack

Card Size is 5 1/2 by 4 1/4

I used the Print 2 Cut feature on all the elements on the card front. 

Easter Bunny with flourish

Cricut Machine

Celebrate with Flourish Cricut Cartridge

Sizzix Eclips Machine

Tickets Cut File (my own file)

Big Shot Machine

Scalloped Oval Frame Sizzix Die

Butterflies Cut File

Studio G Stamps

Stickles (Green) (Yellow)

Pattern Paper K I Memories Holiday  Pack

Distress Ink (Walnut Stain)

Recollection Gems

Recollections Cardstock

White Gel Pen

Card is 5 1/2 by 4 1/4. Bunny was cut 2.5 inches. Cut all the pieces of the bunny with the cricut machine. Layered them and added stickles.  Butterflies were cut at 1 inch. The oval is the inner part of the Scalloped Oval Frame. Went around the edges of the oval with a white gel pen. The Ticket Border was cut to fit the length of the card. I went around the edges of the border with distress ink. I used different studio G stamps and added one stamp on one ticket. I added white and pink to the bunny. To finish off the card I addad some pink and green gems.